Transpak GENESIS HORI TP-502MH, Руководство по эксплуатации, безопасности и запасным частям, Страница: 33 / 117

-A28-
2. Maintenance
Only use original spare parts supplied by manufacturer.
Daily:

Use air gun to clean the circled positions (nearby the cutters, strap guide daily
Remove plastic residue in the machine.
Weekly:

Lubricate front bar, press bar and rear bar weekly.

Please refer to the above mesh areas for instruction

Before lubricating, be sure to clean the parts first to avoid mixing oil and debris
which might have a bad effect on machine’s function

Check the wire rope of suspension bracket Ass’y, replace it if necessary.
Monthly :( or 3,000 strapping cycles)

Clean both sides of heater plate and polish with fine sandpaper if necessary
ATTENTION: Make sure the welding plate is cool first!!

Check cam rollers of seal head for easy movement.

Slide table back to home position automatically by the spring tension.

Be sure to clean any debris in the tension roller
6 Months:
（
or 18,000 strapping cycles
）

Check heater plate, replace and readjust it if necessary.

Check strap cutter in seal head, replace it if necessary.

Check that connector at wiring loom to printed circuit board is firmly fixed.

Make machine ready for operation. Strap one bundle manually several times, paying
attention to mal-functions, repeat procedure.
Air Air