-6-
INSTALLATION & BASIC OPERATION
Note: when first using this television, it has to process Auto Search to
memorize the number of the program channels.
1. ANTENNA CONNECTION
Connect the 75 OHM coaxial cable from the antenna to the RF socket
on the rear panel, as shown above.
For better reception, especially in outlying areas or where
ghosting or interference occurs, an external roof- mounted
antenna is recommended.
For UHF channel reception, use the specified UHF antenna.
When using 300 flat cable, a 300 -75
adapter should be
used for a proper connection to RF socket. The 300 -75
adapter is not supplied.
2. POWER CONNECTION
Plug the power cord into an AC outlet (AC 230-240V ~ 50Hz)
Press POWER button to turn on the television, press POWER
button again to turn off the television.
3. PRESETTING TV CHANNELS
Press MENU button on the remote controller until the Search
Menu appears on the screen.
Press <P+> or <P-> button to highlight AUTO TUNE function on
the screen, press <V+> button to start AUTO searching.
After AUTO searching, this TV set can memorize the numbers of
program channel from 0 to 248. Once the TV stops at the channel
0. the television is ready for watching.
