TransLite TL-9542A, Руководство пользователя

Страница: 31 / 41

P a g e | 31
Figure-8
Modulator Setting
Enter in
“Modulator” and it will display the Modulator Configuration screen as Figure-9 where
can set modulation parameters.
RF On
–To decide whether to enable the RF (carrier A/B/C/D) output or not.
RF Frequency A/B/C/D
– to set the RF frequency for the 4 carriers
RF Out level
–to set the RF output level
ASI Output
– To select carrier output channel for ASI output (Output A: The ASI output
programs are same as carrier A; Output B: The ASI output programs are same as carrier B; and
the like.)
This device is with MPTS IP
output. The 4 boxes represent
respectively IP Channel
1/2/3/4. Click the related
box(es) to enable the
corresponding channel(s) to
output programs.
To configure the
output IP address and
ports for the 4 IP
Channels respectively.