Transition Networks SPOEB1011-105, Руководство пользователя

Страница: 3 / 16

Transition Networks SPOEB10xx-105 User Guide
33618 Rev. C https://www.transition.com/ Page 3 of 16
Features

External AC power supply

IEEE 802.3af Power Over Ethernet compatible

48 VDC PSE output voltage

Applies power on the data pairs (aka Alt A, or Mode A)

PD Detection Signature

Over-Current Protection and Under-Current Detection

Powered Device (PD) Reset

PD Detection Signature

Minimum Load Sensing

Fault Protection Input

Auto-Negotiation (802.3u): allows devices to perform automatic configuration to achieve the best possible
mode of operation over a link.

AutoCross
™
: automatically detects and configures the twisted pair port to the correct MDI or MDI-X
configuration.

Link Pass Through (LPT): a troubleshooting feature that lets the media converter monitor both fiber and
copper RX ports for loss of signal.

Far End Fault (FEF): a troubleshooting feature generally used with Link Pass Through to notify both end
devices of a loss of link.

Automatic Link Restoration: lets Transition Networks' converters automatically re-establish link in all
network conditions.
Application Example - Power over Cat5 to Remote Devices
Packing List
Make sure that you have received the following with your SPOEB10xx-105:

One SPOEB10xx-105 Media Converter

One external power supply (25072) and power cord (25071)

Four rubber feet

One printed Documentation Post Card
Please save the packing material for possible future use.