background image

Transition Networks                                   

 

SPOEB10xx-105 User Guide 

33618 Rev. C 

https://www.transition.com/

  

Page 

13

 of 

16

 

Safety Warnings and Cautions 

These products are not intended for use in life support products where failure of a product could reasonably be expected to 
result in death or personal injury. Anyone using this product in such an application without express written consent of an 
officer of Transition Networks does so at their own risk, and agrees to fully indemnify Transition Networks for any damages 
that may result from such use or sale. 

 Attention

: this product, like all electronic products, uses semiconductors that can be damaged by ESD (electrostatic 

discharge). Always observe appropriate precautions when handling. 

  Warning

: Potential for damage to equipment or personal injury.  

 

Warning

: Risk of Electrical Shock 

Service, Warranty and Tech Support 

Warranty 

Limited Lifetime Warranty 

Effective for Products Shipped May 1, 1999 and After. Every Transition Networks labeled product purchased after May 1, 
1999, and not covered by a fixed-duration warranty will be free from defects in material and workmanship for its lifetime. 
This warranty covers the original user only and is not transferable. 

This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of 
operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal 
wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the 
equipment, contact Transition Networks’ free technical support services.  

Transition Networks will, at its option:  

   • Repair the defective product to functional specification at no charge  

   • Replace the product with an equivalent functional product 

   • Refund a portion of purchase price based on a depreciated value  

Return Authorization 

To return a defective product for warranty coverage, contact Transition Networks’ technical support department for a 
return authorization number. Transition's technical support department can be reached through any of the following 
means:  

Contact Us 

Technical Support

: Technical support is available 24-hours a day 

US and Canada: 1-800-260-1312 | International: 00-1-952-941-7600 

Main Office 

tel: +1.952.941.7600 | toll free: 1.800.526.9267 | fax: 952.941.2322 

[email protected]

  

|

  

[email protected]

 

 |  

[email protected]

 

Address 

Transition Networks | 10900 Red Circle Drive | Minnetonka, MN 55343, U.S.A. 

 

 

Содержание SPOEB1011-105

















Отзывы: