3. INSTALLATION
3-19
MANAGEABLE HUB
Bringing up Configuration Software.
NOTE: Refer to 1.6 for a detailed description of the StackMaster™
Configuration Software Display available at the attached terminal.
To bring up the StackMaster™ configuration software, at the attached
terminal command line, enter:
^ D
(“control D”)
The StackMaster™ Configuration Main Menu comes up.
At the StackMaster™ Configuration Main Menu, to select any of the listed
configuration menus, type and enter the name of the selected menu:
MAIN> <selected menu>
AT ANY AND ALL CONFIGURATION MENUS:
To modify a parameter, use the command syntax:
ANY MENU> < p a r a m e t e r > = < v a l u e >
Alternatively, select a parameter available at a different menu by using the
command syntax:
ANY MENU > <any menu> <p a r a m e t e r> = <value>
To reference acceptable values for a parameter, use the help command
syntax:
ANY MENU> < p a r a m e t e r > = < ? >
To bring up a reference list of line-editing commands, type and enter:
ANY MENU > k e y s
To exit, enter the command:
ANY MENU> q u i t
StackMaster Configuration Main Menu
main
serial
ip
bootp
snmp
misc
MAIN >
Select a parameter [main ==> root menu OR ? ==> help]