1.6.2
IP Parameters Menu
The IP Parameters Menu, selectable from the Configuration Main Menu,
brings up software for verifying or for setting the Internet protocol network
parameters.
The Network Parameters Menu comes up with system values for the
following network parameters:
IP address
= x.x.x.x
Management station to which
asynchronous SNMP reports
will be sent, in format:
nnn.nnn.nnn.nnn*
submask
= x.x.x.x
Subnet mask (Site-specific
identifier)
router
= x.x.x.x
Site-specific identifier
name
= up to 256 characters
UNUSED
domain
= up to 256 characters
UNUSED
nameserver = x.x.x.x
UNUSED
NOTE: Parameter values which have not been set are indicated at the
Network Parameters Menu by zeros or by the word “NONE”.
* IP addresses, which form the logical address basis for TCP/IP and SNMP
networking, can be obtained by contacting:
Network Information Center
SRI International
Stanford, California USA
telephone: 1-800-235-3155
network:
1. INTRODUCTION
1-15
MANAGEABLE HUB
Network Parameters Menu
ipaddr
= 192.251.144.253
name
= NONE
submask = 255.255.255.0
domain = NONE
router
= 0.0.0.0
nameserver= 0.0.0.0
IP>
Select a parameter [main ==> root menu OR ? ==> help]