1-18
StackMaster™
1.6.5
Bootp Parameters Menu (Currently Not Available)
The Bootp Parameters Menu, selectable from the Configuration Main
Menu, brings up bootstrap protocol software that allows software
upgrades.
NOTE: The bootstrap protocol allows a network device to receive network
information, including its own IP address.
The Bootp Parameters Menu lists the following commands:
bootserver =
x.x.x.x
IP address from which
configuration parameters will be
read
dir(ectory) =
NONE
or 1
Directory from which configu
ration parameters will be read
file =
NONE
or 1
File from which configuration
parameters will be read
mode =
EPROM
Source of bootp configuration
parameter.
NOTE: Parameter values which have not been set are indicated at the
Bootp Parameters Menu by zeros or by the word “NONE”.
Bootp Parameters Menu
bootserver
= 0.0.0.0
file
= NONE
dir
= NONE
mode
= EEPROM
BOOTP >
Select a parameter [main ==> root menu OR ? ==> help]