Transition Networks
SM8TAT2DPB Install Guide
5
of
23
1. Introduction
Overview
The Transition Networks SM8TAT2DPB L2+ Managed PoE+ Switch provides high-performance,
IEEE-compliant network solutions. They include powerful management features that can
boost performance and increase productivity. This guide describes hardware installation and
basic troubleshooting for these managed switches.
Front Panel
The SM8TAT2DPB switch front panel has system and port LEDs for installation and
troubleshooting and the Mode/Reset button.
The SM8TAT2DPB
front panel is shown and described below.
LED Descriptions
The LEDs on the front panel provide users with switch status checking and monitoring.
The three types of LEDs are System, Mode, and Port Status. The following section details the
functions and descriptions of the LED indicators.
System LED
The System LED indicates if the switch is powered up correctly or not, or, indicates if there is a
system alarm triggered for troubleshooting.
LED
Color
State
Description
System
Green
On
The switch is powered ON correctly.
Off
The switch is not receiving power.
Red
On
An abnormal state, such as exceeding
operating temperature range, has been
detected in the switch.
