Transition Networks SM8TAT2DPB, Инструкция по установке

Страница: 20 / 23

Transition Networks SM8TAT2DPB Install Guide
33698 Rev. A https://www.transition.com Page 20 of 23
enabling performance optimization, accounting/billing for usage,
and defense against security threats
IEEE 802.1ab (LLDP)

Used by network devices for advertising their identities,
capabilities, and neighbors on an IEEE 802ab local area network

Support LLDP-MED extensions
Web GUI Interface
Built-in switch configuration utility for browser-based device
configuration
CLI For users to configure/manage switches in command line modes
Dual Image
Independent primary and secondary images for backup while
upgrading
SNMP
SNMP version1, 2c and 3 with support for traps, and SNMP
version 3 user-based security model (USM)
Firmware Upgrade

Web browser upgrade (HTTP/ HTTPs) and TFTP

Upgrade through console port as well
NTP
Network Time Protocol (NTP) is a networking protocol for clock
synchronization between computer systems over packet-switched
Other Management

HTTP/HTTPs; SSH

DHCP Client/ DHCPv6 Client

Cable Diagnostics

Ping

Syslog

Telnet Client

IPv6 Management
Power over Ethernet (PoE)
Port Configuration Supports per port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE devices
(PDs).
Auto-checking Check the link status of PDs. Reboot PDs if there is no responses.
Power Delay
The switch provides power to the PDs based on delay time when
PoE switch boots up, in order to protect switch from misuse of the
PDs
.