Transition Networks SM8TAT2DPB, Инструкция по установке

Страница: 3 / 23

Transition Networks SM8TAT2DPB Install Guide
33698 Rev. A https://www.transition.com Page 3 of 23
Compliance and Safety Statements
FCC-CLASS A: This equipment has been tested and found to comply with the limits for a Class A
computing device pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
You may use unshielded twisted-pair (UTP) for RJ-45 connections - Category 3 or better for 10 Mbps
connections, Category 5 or better for 100 Mbps connections, Category 5, 5e, or 6 for 1000 Mbps
connections. For fiber optic connections, you may use 50/125 or 62.5/125 micron multimode fiber or
9/125 micron single-mode fiber.
CE MARK DECLARATION OF CONFORMANCE FOR EMI AND SAFETY (EEC): This equipment has
been tested and found to comply with the protection requirements of European Emission Standard
EN55022/EN61000-3 and the Generic European Immunity Standard EN55024.
Declaration of Conformity
Related Manuals
The following manuals give specific information on how to use the switch:

SM8TAT2DPB Quick Start Guide, 33697

SM8TAT2DPB Install Guide, 33698

SM8TAT2DPB Web User Guide, 33699

SM8TAT2DPB CLI Reference, 33700
To access the manuals, firmware, datasheet or other documentation for your product, enter your model
number (SM8TAT2DPB) in the “Search” box at our website at https://www.transition.com .
For Transition Networks Drivers, Firmware, Manual, etc. go to the Product Support webpage (no logon
required). For Transition Networks Application Notes, Brochures, Data Sheets, Specifications, etc. go to the
Support Library (no registration required).