Transition Networks IONPS-D-R1, Руководство пользователя

Страница: 42 / 50

Transition Networks, Inc. IONPS-D-R1 User Guide
33707 Rev. A https://www.transition.com Page 42 of 50
5. Troubleshooting, Support, and Compliance Information
Messages
Message :
Primary power supply is at critical temperature: %d
Secondary power supply is at critical temperature: %d
Meaning
: Notification that an IONPS-D-R1 is overheated. The Power Supply temperature trap
“tnPowerSupplyEnvMonTemperatureNotif” was sensed.
Recovery : 1.
Message : Error: only IONPS-D-R1 can run this command!
Meaning : You tried to enter an unsupported command.
Recovery : 1. Try another command on this device. 2. Switch to another device ( go command) and re-try the
original command.
Message : Error: System is busy, please retry this command later!
Meaning : You tried to enter a command while the system is processing another command.
Recovery : 1. Wait a few moments and then re-try the command.
Message : Error: this command should be executed on a device!
Meaning : You tried to enter a port-level command while at the CLI command device level.
Recovery : 1. Try another command. 2. Switch to the port level ( go command) and then re-try the command.
Message : Fail to get IONPS-D-R1 operation mode!
Meaning : You entered the show ionpsr1 mode command but the information requested could not be returned.
Recovery : 1. Make sure this is the command you want. 2. Make sure this is the device on which you want to
enter the command. 3. Try another command or try another device.
Message : Fail to get IONPS-D-R1 configure mode!
Meaning : You entered the show ionpsr1 fan config command but the information requested could not be
returned.
Recovery : 1. Make sure this is the command you want. 2. Make sure this is the device on which you want to
enter the command. 3. Try another command or try another device.