CPSMP-210 48VDC and CPSMP-220 24VDC Power Supplies
2
24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Table of Contents
Cautions and Warnings
3
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cautions and warnings in this manual . . . . . . . . . . . . . . . . . . . . . . . . .3
Description
4
Power supply component identification . . . . . . . . . . . . . . . . . . . . . . .4
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installation
5
Configuration switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Configuration switch-postion explanations . . . . . . . . . . . . . . . . . . . . .5
Configuring two power supplies in one chassis . . . . . . . . . . . . . . . . .6
Installing the power supply into a PointSystem chassis . . . . . . . . . . .6
Power source circuit requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Equipment ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Disconnect requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting external power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Redundant
(failover)
chassis power supply . . . . . . . . . . . . . . . . . . . . .9
Maintenance
10
Replacing the power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Configuring the power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Replacing the fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Technical Specification
12
Troubleshooting
13
Contact Us
14
Compliance Information
15
[email protected] -- Click the “Transition Now” link for live Web chat.
3
!
!
!
!
!
!
!
Cautions and Warnings
Definitions
Cautions indicate potential damage to equipment.
Warnings indicate potential hazard or injury to people.
Cautions and warnings in this manual
Cautions and Warnings are explained here and placed throughout this manual where
appropriate.
CAUTION: While installing or servicing the power supply, wear a grounding
device and observe all electrostatic discharge precautions. Failure to observe this
caution could result in damage to, or failure of the power supply.
WARNING: Do not connect the power supply to an external power source before
installing it into the chassis. Failure to observe this warning could result in an
electrical shock, even death.
WARNING: The power supply has a provision for grounding. Equipment
grounding is vital to ensure safe operation. The installer must ensure that the power
supply is properly grounded during and after installation. Failure to observe this
warning could result in an electric shock, even death.
WARNING: A readily accessible, suitable National Electrical Code (NEC) or
local electrical code approved disconnect device and branch-circuit protector must
be part of the building's installed wiring to accommodate permanently connected
equipment. Failure to observe this warning could result in an electric shock, even
death.
WARNING: Turn the power supply and external power source OFF and ensure
that the power supply is disconnected from the external power source before
performing any maintenance. Failure to observe this warning could result in an
electrical shock, even death.
WARNING: Ensure that the disconnect device for the external power source is
OPEN
(turned OFF)
before disconnecting or connecting the power leads to the
power supply. Failure to observe this warning could result in an electric shock,
even death.
!
!
!
!
!
!
CPSMP-210 48VDC and CPSMP-220 24VDC Power Supplies
