-
9-
Revisions G or later:
Revision G was implemented in January 2016 for the LCA-9PC to change the J1
connector to from female to male, and the J2 connector to from male to female.
DB9 cables built for earlier revisions cannot be used with Revision G or later units.
To determine the LCA-9PC revision:
Revisions G and later:
J1-Male: Requires female DB9 cable connector to sensor.
J2-Female: Requires male DB9 cable connector to input power/signal output.
Revision letter
J1- Male DB9
Revisions earlier than G:
J1-Female: Requires Male DB9 to be installed to sensor.
J2-Male: Requires Female DB9 to be connected to input power/signal output.
Revision letter
J1- Female DB9
