Transcend TS-AVE3/B страница 46 Скачать руководство пользователя

Страница: 46 / 55

•

Reset Configuration Data

Normally, leave this field on “Disabled”. Select “Enabled” to reset Extended System

Configuration Data (ESCD) if you have just installed a new add-on card and the system

reconfiguration has caused such a serious conflict that the OS cannot boot. The setting

will automatically be set back to “Disabled” when the system reboots.

•

Resources Controlled by

The Award Plug and Play BIOS can automatically configure all the boot and Plug and

Play (PnP) compatible devices. If you select “Auto(ESCD)”, the Interrupt Requests

(IRQs) and DMA assignment fields will be deactivated as the BIOS automatically assigns

them. If you select “Manual” you may enter the “IRQ Resources” and “DMA Resources”

submenus to make manual assignments.

TS-AVE3/B

•

PnP OS Installed

This field allows you to use a Plug and Play (PnP) OS to configure the PCI bus slots

instead of using BIOS. Thus, interrupts may be reassigned by the OS when “Yes” is

selected. To prevent reassigning of interrupt settings when a non-PnP OS is installed,

select the default setting of “No”.

3.8 PnP/PCI Configuration Setup

BIOS SETUP

Содержание TS-AVE3/B
























































Результаты поиска

Содержание TS-AVE3/B

Отзывы:

Похожие инструкции для TS-AVE3/B

Бренды по названию

Популярные бренды

Transcend TS-AVE3/B, Руководство пользователя

Результаты поиска

Содержание TS-AVE3/B

Отзывы:

Похожие инструкции для TS-AVE3/B

Бренды по названию

Популярные бренды