TS-ABD4
37
BIOS SETUP
•
USB KB Wake-Up From S3
When your system is in S3 (Suspend to RAM) mode, you can wake-up the system by
pressing the wake-up key on the USB Keyboard.
•
CPU THRM-Throttling
Select the CPU Thermal-Throttling rate. If BIOS detects that the CPU temperature is
too high, it will slow down the CPU’s speed according to this field. The choices are:
“87.5%”, “75.0%”, “62.5%”, “50.0%”, “37.5%”, “25.0%” and “12.5%”.
•
Resume by Alarm
Select “Enabled” if you want to power up your system at a certain time on the same day
every month, or at a certain time every day.
•
Date/Time
Set the Date and Time to Power On the system. Activated only when the “Resume by
Alarm” field is enabled.
•
Reload Global Timer Events
When “Enabled”, an event occurring on any device listed below restarts the global timer
The settings in these fields enable or disable the detection of
IDE, floppy, serial and parallel port activities for powering down
state transition. Actually, it detects read/write to/from I/O ports.
•
Power On by Ring
Select “Enabled” to Power On your system when the external modem receives a call.
NOTE: This function requires an external modem which supports the Ring Wake-
Up function.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D]#
