TS-ABD4
27
BIOS SETUP
•
Gate A20 Option
Choose “Fast” (default) or “Normal”. “Fast” allows RAM access above 1MB to use the
fast Gate A20 line.
•
Typematic Rate Setting
When this function is “Disabled”, the following two items (Typematic Rate and Typematic
Delay) are irrelevant. Keystrokes repeat at a rate determined by the keyboard controller
in your system. When this function is “Enabled”, you can select a typematic rate and
typematic delay.
•
Typematic Rate (Chars/Sec)
When the Typematic Rate setting is “Enabled”, you can select a typematic rate (the rate
at which a character repeats) when you hold down a key of “6”, “8”, “10”, “12”, “15”,
“20”, “24” or “30” characters per second.
•
Typematic Delay (Msec)
When the Typematic Delay setting is “Enabled”, you can select a typematic delay (the
delay before key strokes begin to repeat) of “250”, “500”, “750” or “1000” milliseconds.
•
Security Option
If you have set a password, you can select whether the password is required while the
system boots (“System”), or only when you enter “Setup”.
•
APIC Mode
Options are: “Enabled” or “Disabled”.
•
MPS Version Control For OS
Options are: “1.1” or “1.4”.
•
OS Select for DRAM > 64MB
Select “OS2” only if you are running OS/2 operating system with more than 64 MB of
RAM on your system. Otherwise select “Non-OS2”.
•
Report No FDD For WIN 95
Select “Yes” to release IRQ6 when there is no floppy disk drive, for compatibility with
WIN 95 logo certification.
•
Small Logo (EPA) Show
Options are: “Enabled” or “Disabled”.
