•
Video Off Method
Defines the Video Off features.
-
Blank Screen: Only blanks the screen. Use this for monitors without power
management and “green” features.
-
V/H SYNC+BLANK: Blanks the screen and turns off vertical and horizontal
scanning.
-
DPMS: The DPMS (Display Power Management System) feature allows the BIOS
to control the video display card if it supports the DPMS feature.
•
VIDEO Off In Suspend
This determines the manner in which the monitor is blanked. Select “Yes” to blank the
monitor when the system enters suspend mode.
•
Suspend Type
Select Suspend Type: “Stop Grant” or “PWR ON Suspend”.
•
MODEM Use IRQ
You can select one of the following interrupt resources for modem use: “N/A”, “3”,
“4”, “5”, “7”, “9”, ”10”, and “11”.
•
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour), all devices except
the CPU will be shut down.
•
HDD Power Down
After the selected period of system inactivity (1 to 15 minutes), the HDD powers down
while all other devices remain active. This feature doesn’t effect SCSI hard drives.
•
Soft-Off by PWR-Bttn
When set to “Instant-off”, the ATX switch can be used as a normal system Power Off
button. When set to “Delay 4 seconds”, you need to press the Power Off button down
for more than 4 seconds if you want to Power Off the system.
•
Wake-Up by PCI Card
Select “Enabled” if you want to Power On your system when a PCI event occurs.
BIOS SETUP
36
Transcend Information, Inc.
