TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Chapter 2 - Getting Started
Page 20
Port Mapping (802.1q) & Port Priority (802.1p)
The Port Mapping feature of the TrangoLINK APEX™ is a fixed setting and provides an
additional amount of data security since traffic on the Ethernet port is segmented and
isolated from traffic on the fiber port.. The Port Priority feature allows for an individual
data port to have priority over the remaining data port. This means that you can run both
copper Gig-E as well as the fiber SFP ports simultaneously. The priority groups are 0-7
and can be applied to GigE port as well as the fiber port.
!
PORT MAPPING IS ENABLED BY DEFAULT THROUGH THE SMART_MODE
COMMAND. SHOULD YOUR NETWORK REQUIRE Q IN Q OR OTHER UNIQUE
PROTOCOL YOU MAY NEED TO DISABLE SMART_MODE. IN BAND MANAGEMENT
WILL NOT WORK WITH SMART_MODE DISABLED.
Class of Service (802.1p)
TrangoLINK APEX has Class Of Service capabilities that provide priority of types
of traffic across the link. The traffic can be classified into 8 priorities 0-7 which can then
be assigned to 4 queues.
Management
The TrangoLINK APEX™ can be managed through HTTP, HTTPS, Telnet, SSH, SNMP
and console port. The default IP address and passwords for the TrangoLINK APEX™
are below:
Access mode
Username
Password
CLI View Mode
admin
trango
CLI Config Mode
N/A
trango
CLI Debug Mode
N/A
N/A
Web Interface
admin
trango
SNMP Read Community
N/A
public
SNMP Write Community
N/A
private
SNMP Trap
N/A
trapstr
Table 5:
Default Login Passwords
Содержание TrangoLINK APEX 18
Страница 2: ......
Страница 11: ...TrangoLINK Apex 18 User Manual Rev 1 0 Section Preface Page 9...
