Installation - Mechanical
20
CLCH-SVX009A-EN
FC Fan Size 12-30
1.
Remove drive side screws on isolator brackets
2. Cut banding and remove
Direct-Drive Plenum Fans
1.
Remove two screws on the motor side of the fan
assembly
General Lifting Considerations
Figure 7.
Shipping tie-down removal for FC fan 12-30
Figure 8.
Shipping tie-down removal for DDP fan
See Detail B
Detail B
See
Detail C
Detail C
WARNING
Risk of Unit Dropping!
Do not use skid tie down brackets to lift the unit.
Improper use of the tie down brackets could result in
unit dropping and crushing technicians which could
result in death or serious injury, and equipment
damage.
Figure 9.
Do not use skid tie down for lifting
WARNING
Heavy Objects!
Failure to follow instructions below or properly lift unit
could result in unit dropping and possibly crushing
operator/technician which could result in death or
serious injury, and equipment or property-only damage.
Ensure that all the lifting equipment used is properly
rated for the weight of the unit being lifted. Each of the
slings used to lift the unit must be capable of
supporting the entire weight of the unit. Lifting slings
may not be of the same length. Adjust as necessary for
even unit lift.
WARNING
Risk of Unit Dropping!
Failure to follow instruction below could result in death
or serious injury. To prevent modules/subassemblies
from dropping, ALWAYS place, assemble, and suspend
them one at a time.
