Trane Tracer Concierge BMTC015ABC012000, Руководство по установке

Страница: 9 / 20

BAS-SVN141D-EN 9
Step 5: Install Tracer Concierge System Panel
On WCS zone sensors, set:
• GRP and NET to 1 and 1
• Address the WCS to match the corresponding unit controller
To enter the WCS address settings, press and hold the address button for 3 seconds.
For more information, see Air-Fi
®
Wireless Communication Sensor (WCS) Configuration
Instructions, X3964126001 that is shipped with each zone sensor.
Step 5: Install Tracer Concierge System Panel
Important: Do not power the display until instructed to do so in Installation
Instructions.
Dimensions and Clearances
Figure 1 shows the internal enclosure dimensions and minimum clearances. Select a
mounting location that provides adequate space for the minimum clearance
dimensions. Refer to
Figure 7 for external enclosure dimensions.
Figure 5. Press the address button
Figure 6. Enclosure minimum clearances with cover
12 in.
(305 mm)
36 in.
(914 mm)
12 in.
(305 mm)
24 in.
(610 mm)
12 in. (305 mm)
50 in. (1270 mm) Recommended