Trane Tracer Concierge BMTC015ABC012000, Руководство по установке

Страница: 10 / 20

10 BAS-SVN141D-EN
Step 5: Install Tracer Concierge System Panel
Location and Mounting Guidelines
Location
The location should meet the following operating environment requirements and
clearances:
Important: The Tracer Concierge System Panel enclosure must be installed indoors.
Trane recommends locating the enclosure:
• Where service personnel have easy access.
• In areas that restrict public access to minimize tampering or vandalism.
Mounting Instructions
Note: The internal enclosure panel comes with four (4) mounting holes.
1. Using the enclosure as a template, mark the location of the four (4) mounting holes
on the mounting surface to accommodate the supplied #10 screws and/or #10 wall
anchors.
2. Set aside the enclosure and drill the marked location holes for the screws.
Figure 7. External dimensions
Table 6. Operating environment specifications
Temperature: From 32°F to 122°F (0°C to 50°C)
Humidity: 5–95% non-condensing
Power Requirements: 120 Vac: 9A maximum, 1 phase, 60 Hz
Weight: Mounting surface must be able to support 60 lb. (28 kg)
Dimensions: 16 ½ in. × 14 ¾ in. × 5 ½ in. (418 mm × 373 mm × 140 mm)
Installation: U.L. 840: Category 3
Pollution: U.L. 840: Degree 2
Knockout for 0.75 in. (19 mm) conduit
Knockout for 50 in.
(13 mm) conduit
Knockouts for 1 in. (25 mm) and 0.75 in. (19 mm) conduit
Knockout for 0.50 in. (13 mm)
conduit (for AC wiring)
3.125 in. (80 mm)
14.75 in.
(373 mm)
2.25 in (56 mm)
15 in.
(381 mm)
5.5 in.
(140 mm)
13.25 in (337 mm)
16.5 in.
(418 mm)