Trane Tracer Concierge BMTC015ABC012000, Руководство по установке

Страница: 12 / 20

12 BAS-SVN141D-EN
Step 5: Install Tracer Concierge System Panel
Note: The ground wire should be continuous back to the circuit breaker panel.
9. Replace the cover plate.
10.On a field-supplied label, record the location of the circuit breaker panel and the
electrical circuit. Attach the label to the cover plate.
Install Enclosure Door
1. Unpack the door and check for any missing or damaged parts.
2. Position the door at a 90 degree angle from the enclosure, as shown below.
WARNING
Hazardous Voltage!
Failure to replace the cover plate could result in death or serious
injury. The cover plate must be in place when the controller is
operating.
Figure 8. AC wiring
Figure 9. Installing the enclosure door