Drive and Cabinet
AFDE-SVU02F-EN
17
Power Module Component
Locations
Frame 3 Units
LF200405AAP and LF200608CCP
The main power module components for a Frame 3 unit
are listed below. Each numbered item corresponds to a
number in
Figure 3, p. 18
or
Figure 4, p. 19
.
1. Wire Harness Assembly, Power Supply, Logic
2. Current Feedback Device, 1000 A
3. Terminal Block, 2-position
4. 80W Power Supply Assembly
5. Cable Assembly, 40-pin, 0.050 in (1.27 mm) Pitch, Flex
Film
6. Cable Assembly, 30-pin, 0.050 in (1.27 mm) Pitch, Flex
Film
7. Wire Harness Assembly, Power Supply, Upper Gate
8. Inverter Power Interface Assembly
9. Wire Harness Assembly, Power Supply, Lower Gate
10. Insulation Sheet
11. DPI Communications Interface
12. Rectifier Power Interface Assembly
13. Wire Harness Assembly, Gate Driver
14. Wire Harness Assembly, Current Feedback Device
15. Wire Harness Assembly, Line Sync.
16. Wire Harness Assembly, DC Bus Bleeder Resistors
17. Cable Assembly, 20-pin, 0.050 in (1.27 mm) Pitch, Flex
Film
18. RS-485 Communications Assembly (RECOMM)
19. Internal Fan
20. Connector, Terminal Block, 32-pin
21. AC Line I/O Assembly
22. Rectifier Control Assembly
23. Inverter Control Assembly
24. Standard I/O Board (optional)
25. Synchronization Cable