![background image](http://html.mh-extra.com/html/ab-quality/powerflex-700s/powerflex-700s_quick-start-manual_450641001.webp)
Quick Start
PowerFlex
®
700S Drive
Introduction
This document is designed to guide you through the basic steps needed to
install, start-up and program the PowerFlex 700S Drive.
The information
provided does not replace the user manual and is intended for qualified
personnel only.
For detailed PowerFlex 700S information refer to the
following:
Precautions
Class 1 LED Product
General Precautions
Title
Publication
Available...
PowerFlex 700S User Manual
20D-UM001
www.theautomationbookstore
.com
PowerFlex 700S Reference Manual, Vol. 2 PFlex-RM-002
PowerFlex 700S Firmware Release Notes 20D-RN004
!
ATTENTION:
Hazard of permanent eye damage exists when
using optical transmission equipment. This product emits intense
light and invisible radiation. Do not look into module ports or
fiber optic cable connectors.
!
ATTENTION:
This drive contains
ESD
(Electrostatic
Discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing or
repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with
static control procedures, reference A-B publication 8000-4.5.2,
“Guarding Against Electrostatic Damage” or any other
applicable ESD protection handbook.
!
ATTENTION:
An incorrectly applied or installed drive can
result in component damage or a reduction in product life.
Wiring or application errors such as under sizing the motor,
incorrect or inadequate AC supply, or excessive surrounding air
temperatures may result in malfunction of the system.
!
ATTENTION:
Only
qualified personnel
familiar with the
PowerFlex 700S Drive and associated machinery should plan or
implement the installation, start-up and subsequent maintenance
of the system. Failure to comply may result in personal injury
and/or equipment damage.