Trane CCEB, Установка, эксплуатация и обслуживание

Страница: 43 / 111

Figure 65: Applying the sealing agent on the frontal joints
Figure 66: Unit separation acces-
sible via door
Figure 67: Sealing the section
connection (joint) with the sealing
agent
5.1.6 Cable gland
For the connection of engines, pumps, electric heaters, sensors, etc., TRANE loosely supplies ma-
terial for cable glands (
Figure 71 ), which must be installed properly. The following procedure is
recommended:
1. Drilling through unit casing (at right angles to the surface).
2. Enlarge drillings on external panel and internal panel according to
Table 3 (by using a step drill
– see
Figure 68 ).
Unit flange
Roof flange
Joint
Joints
Access (door)