Figure 45:
Hexagon bolt with nut M6x6
Figure 46:
Connection frame
Additionally the following rule applies:
1) Internal mounted connection angles and frames are
accessible
and the sections are
properly
aligned
- The following connection is sufficient:
-
in
case B
, connection only via connection angles
-
in
case C
, connection only via connection frames
2) Internal mounted connection angles and frames are
not accessible
and/or the sections are
not properly aligned
:
Connection between the internal panels, as described in case A, must be carried out addition-
ally.
5.1.3 Detailed solutions and connection components
-
Connection between door frame / door frame and door frame / internal panel
Screw spacing: 152 mm
Figure 47:
Tapping screw ø8 x 11
Figure 48:
Joint on the AHU drawing
Figure 49:
Connection between door
frame / internal panel
-
Connection of 3 mm thick casing components without holes
