Trane BAYEVAC04BK1B, Руководство по установке

Страница: 2 / 16

Page 2
INSTALLER'S GUIDE
Section 2. General Information
Section 3. Heater Assembly Labeled
Parts may vary by model. Items shown
are for illustrative purposes only.
Width Adjustment Brackets
Heater Baffle
Heater Rack
Non-Cyclic Thermal
Limit Switch
Breaker Bracket
(LG heater terminal bracket differs)
Ground Lug
(LG heater has terminal lug)
Circuit Breaker
(Breaker models only)
Seal Plate
(Breaker models only)
- In document pack
Electric Heat
Control -
Communicating
Electric Heat
Control Platform
Nameplate
Edge Guard
- In document
pack
Base Plate
Cyclic Thermal
Limit Switch
Filler Plate
Filler Plate
Retainer Tab and
Screw
- In document pack
Retainer Tab and
Screw
- In document pack
Heater Element
Terminations
Wiring diagram not shown
This electric heater accessory is designed to provide
power directly to the air handler from the accessory
heater's power supply, eliminating the need for addi-
tional circuits. The power and control wiring each use
a single wire harness to connect the heater and the air
handler.
1. Check the unit heater label to confirm that the selected
heater is approved for use with the air handler in the in-
stalled configuration. For some heaters, a corresponding
secondary nameplate label is included. Place the label
within the heater data table on the air handler nameplate.
2. Check the components received for damage. Report any
defects or shortages to the transportation company im-
mediately.
3. Be sure the power supply matches the listing shown on
the heater nameplate.