Trane Technologies Thermo King T-1090 Series, Руководство оператора

Страница: 36 / 104

36 TK 56702-1-OP-EN
Figure 28. YES/NO Soft Keys
After the YES soft key has been pressed, the display briefly shows
PROGRAMMING NEW SETPOINT - PLEASE WAIT. The display then confirms
the new setpoint for several seconds.
Figure 29. New Setpoint
If the NO soft key is pressed, the display will briefly show SETPOINT NOT
CHANGED and return to the Standard Display. The Standard Display will
show the old setpoint. The display then returns to the Standard Display
showing the new setpoint. The arrow now points up to indicate that the unit
is heating (
Figure 30, p. 37 ).
IIm mp po orrtta an ntt:: If the setpoint is changed using the + or - keys, the change must
be confirmed or rejected by pressing the YES or NO soft key
within 10 seconds of changing the setpoint.
• If the YES key is pressed, the setpoint change made with the + or - key is
accepted, the setpoint changes, and the display returns to the Standard
Display.
• If the NO key is pressed, the setpoint change made with the + or - key is
not accepted, the setpoint is not changed, and the display returns to the
Standard Display.
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss ffo orr P Prre em miiu um m H HM MII C Co on nttrro oll P Pa an ne ell