Installation and operating manual – TUM1072
TEF 2440
Perimeter / Obstruction light
Special conditions for safe use
DANGER
Special conditions for safe use are critical conditions to maintain the safety of the equipment. These shall be
adhered to in all cases and under all circumstances.
•
Changes made to the product and/or installation of components which do not conform to the approval,
may be a safety violation. The manufacturer will in no circumstance be held responsible for such
activities.
•
For your health and safety, always use safety gear suited for the task. Be certain to follow codes,
regulations and/or specific procedures that are related to the installation.
Technical data
Property
Value
Value
Material
Acid proof stainless steel, powder
coated RAL 9010
Globe: Polycarbonate lexan
Input voltage
24 VAC/VDC, 100-230 VAC 50/60 Hz
Light output
Red: > 32 Candela
Green: > 30 Candela
Power consumption
Max. 10W
Ingress Protection
IP66 (IP67 if drainplug is replaced with blind plug)
Entries/Cable Glands
1xM25 stopping plug
1xM25 cable gland
For use in zone
Safe Area
Height
Red: 240 mm
Green: 147 mm
Width
140 mm
Length
164 mm
Weight
Red: 2,0 kg
Green: 1,9 kg
Product description
Perimeter lights on helideck.. The Luminaire consists of five powerful light emitting diodes
(LEDs) mounted on a machined aluminium base. The LED driver is placed in the lamp bottom
along with terminals. It has a rugged construction andis resistant to vibrations. It has a long
operating life, low power consumption and gives instant light at all temperatures.
It is mounted to the surface with 4 pcs M6 bolts (bolts not supplied by manufacturer).
Transport and storage
•
Transport and store the equipment only in the original packaging
•
Store the equipment in a dry and vibration free place
•
Do not drop!
