15
T23
Series User Manual
For more information about Tramigo tracking products, please visit www.tramigo.com. For distributor, re-seller and
partnership opportunities, email
MIC) to be able to hear voices within 5 meters. The standard hands free kit can detect noises, but
is designed to filter out background noise to improve voice calls.
Voice Calls
The Phone button on your T23 or T23 Fleet can be used to call pre-programmed numbers. Simple
press the button to call up to 3 SPEEDIAL numbers you have set up. To call the first SPEEDIAL
number press the phone button once, to call the second number press the button twice, etc.
You can also receive calls by pressing the Phone button. Incoming calls are indicated with a ring
tone on the speaker and flashing of the GSM and GPS lights.
T23 or T23 Fleet will accept incoming calls from any phone number.
Besides the speaker volume dial located on the hands free two settings can be used to modify the
volume levels; LoudSpeakerVolume and MicrophoneGain described in the T23 Series Parameters
section.
The hands free headset accessory can be ordered from Tramigo, but any standard 2.5mm headset
should work.
5.4
Miscellaneous Features
Name Unit
You can personalise the name of T23 Series so that it will appear in the summary reports. This is
done by using the
NAME
command.
Status
With the
STATUS
command you can see the status of the GSM network, GPS satellites, and battery
power left. It also displays which reports you have turned on.
Automatic STATUS
new
You can also have your T23 Series send automatic STATUS reports triggered by time, distance and
angle.
SystemStatus
new
You can now check the full system statistics thru
SYSTEMSTATUS
command. It shows the number
of reboots made, Ave. Signal strength, GPRS data connection statistics, MCU Temperature and
Odometer details.
Settings
With the
SETTINGS
command you can see which reports you have turned on for all users, and
system wide settings.
Power
You can be notified when the battery power drops below 20% with the
POWER
command.
