Moisture Encounter Plus
User Guide
Instrument Features
Your Moisture Encounter Plus employs advanced analogue and
digital technology to enable the incorporation of many new fea-
tures, which greatly extend the capability of the instrument.
• Three simple pushbutton controls, ON, SCALE and HOLD.
• Non-destructive moisture readings taken in wood from 5% to
30% are displayed on a moving coil meter with linear scale.
• Audio signal sounds when meter indicates high reading.
• Comparative readings between zero and 100 can be taken in
or through drywall, ceramic tile, carpet, floor coverings,
roofing, plaster, and other materials such as brick and cement
block. Meter scale is also color coded to assist in identifying
areas of wet and dry.
• Automatic supply timeout (2 minutes) conserves battery life.
• Supply timeout is automatically extended if a change in meter
reading is detected or if any button is pressed.
• 10 second bleep warning on instrument sounder prior to end
of supply timeout period.
• Last used scale is memorized at supply timeout and
automatically selected next time ON button is pressed.
• Three LEDs (light emitting diodes) show selected scale,
indicate if HOLD selected and provide warning of battery
nearing end of useful life.
• HOLD button freezes moving coil meter, which facilitates
readings taken out-of-sight.
• If HOLD was selected prior to supply timeout, the frozen
meter reading is digitally memorized and restored next time
ON is selected.
Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia
Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia
Phone: 021-8690 6777 (Hunting)
Fax: 021-8690 6771
Mobile: +62 816 1740 8925