62
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
5.0
Printing
Printing parts with your new TRAK 3ntr A2/A4 3D Printer is simple and easy! This section details the 3ntr
3D Printing process. Feel free to print this page out and post it on a wall next to your printer, so you
never miss a step!
Basic Printing Checklist
Check
Pre-Printing Steps
1.
Verify printer maintenance is up to date
2.
Verify the correct file is loaded onto SD card, or Print Server
Check
Material Changes
If a material change is needed
1.
Unload / Load / Change Filament
(with and without MMS)
2.
Clean the Nozzles
Check
Nozzle Changes
1.
Verify you are using the correct nozzle type
2.
Verify you are using the correct nozzle size
Check
Basic Set up Steps
1.
Verify the correct material type is loaded
2.
Verify filament quantity
3.
Verify the filament feed path is clear
4.
Turn HEPA Filter on
5.
Check the Build Plate
6.
Purge the nozzles you plan to use
Check
Printing
1.
Print your Part from an SD Card or the Print Server
Check
Post Printing
1.
Let the print cool down & remove
2.
Wipe Build Plate with alcohol
3.
Turn off HEPA filter
Check
Post Processing
1.
Support Removal
2.
Additional Post Processing
