17
4
Before inserting the TPS jacks into the frame:
• Ensure each valve is in release position.
• Then manually
INSERT the extending tube into the
housing .
NOTE:
Practice adjusting the jack switch from Ready to
Release and extending and compressing the jack
piston so you get used to how it works.
Connect the keel (center) jack first:
• The jack handle should be facing toward the front of
the kayak .
Start with the back (stern) end:
• First, PLACE the back end of the jack AGAINST the rib
of the stern frame .
NOTE:
Before inserting the jack in the keel tube, you will
simply place it against the ribs and use the jack to
spread the ribs apart. This will then make it easier
to then insert the jack.
Содержание T-1600
