TRAK Kayaks T-1600, Руководство по сборке и разборке

Страница: 18 / 48

18
Insert the jack into the bow end:
• Next, you’ll INSERT the front (handle) end of the
centre jack into the bow frame section .
NOTE:
You may not be able to easily spread the frames
apart enough to fit the keel jack into place. Don’t
worry! You can let the jack do this for you.
• Simply PLACE the front tip of the jack against the rib .
• SET the jack switch to READY .
• Then PULL the jack handle several times . This will
extend the jack and spread the frames apart .
• When the jack has extended enough so that there is
room to easily maneuver it into the bow keel tube,
SET the jack switch to RELEASE .
• Then simply INSERT the front end of the jack into the
keel tube of the bow frame section . And INSERT the
back end of the jack into the keel tube of the stern
frame section .
• SET the jack switch to READY, and PULL it several
times so it extends into the tube .
Note:
The more the handled is pulled, the more tension
is applied to the frame, thus pushing the frame
into the shell and the tightening the coaming seal
around the coaming.
4