7.5.2
Stop recording
Any recording started with the buttons on the recorder can be stopped by pressing the
'
Stop
recording'
button on top of the recorder.
A recording started using the switch on the camera cable must be stopped by pressing
the switch again. This releases the switch, the LED in the switch stops blinking but illu-
minates permanently.
Next to the Power switch, on the top
of the recorder, is the button to stop
recording.
After stopping the recording the display shows again the menu activated before starting to record
If you have deactivated the ring buffer, the recording stops when there is only 10 mbyte free me-
mory left. The recording also stops when the camera's video signal is interrupted.
Caution:
Do not remove the memory card while a recording is running. The current recording will
not be properly completed, and is initially not be able to be replayed.With either the program “Vi-
deo Analyse” or “Everec Player” the recording may be repared and playback is possible.
If the memory card is removed, the recorder turns itself off.
Note
: If the batteries are not able to maintain the operational voltage while recording, the recor-
ding is stopped and a prompt to recharge the batteries is shown in the display
7.5.3
Audio recording
The microphone integrated into the camera cable is always used for the audio recording. The vi-
deo file also contains the audio data. In the menu item “Audio Levels” you can adjust the gain of
the audio signal while recording and the volume during playback.
© July 2008
Page 16/33
Instruction Manual