7.5
Recording
7.5.1
Start recording
Start recording by either
pressing the switch on the camera cable; the switch engages and the LED on the switch
flashes.
pressing the Power switch on the top of the recorder again
using the side buttons, press the “S
elect
” button while live preview is running.
LED 1 - „Recording“ starts to blink.
A display is shown at the upper edge of the monitor, in addition to the live image.
The red dot indicates that recording is in progress
The bar indicates the space available in the storage medium. White indicates used me-
mory, and free space is transparent.
The time code shows the run time of the current recording.
Note:
The display switches itself off automatically after 40 seconds. Activate it again by pressing
any side button.
Figure 7: Recording
© July 2008
Page 15/33
Instruction Manual
