TrainModules TM-26781, Руководство пользователя

Страница: 21 / 26

Feedback of the operating status
The feedback of the operating status works by traditional feedback
addresses, to the LocoNet system. The default status of the
feedback is "Not permitted" (address = 0)
The address of the device giving the feedback is contained by the
CV122 and the CV123 and can be calculated as follows:
e.g. Required address decimal value: 509
509/256 = 1 with remainder 253
CV122 value: 1
CV123 value: 253
Start-up delay
The start-up delay can be adjusted in a wide range. With this
delay it can be avoided that faulty data get on the rail from the
digital center before its starting. The start-up delay can be adjusted
between 0 and 60 sec. by the CV126 in one second steps.
Recovery delay
In case of short-circuit the booster automatically resets. Due to the
delay the booster will not be permanently overloaded.
The recovery delay can be adjusted between 5 and 60 sec. by the
CV127 in one second steps.
Automatic recovery can be disabled by the CV125. (see CV-
table).
Short-circuit current
If the booster is used for smaller (less consumption) sections, it is
practicable to adjust the short-circuit current to a lower value for
the protection of the model railroad layout wires and the devices.
The short-circuit triggering current can be adjusted between
0.5 A and 4 A in 0.1 A steps using the CV128.
e.g. Required short-circuit tripping current: 3.5 A
3.5 A = 35*0.1 A => CV128 = 35
Short-circuit delay: 0.5 sec.