TrainModules TM-26781, Руководство пользователя

Страница: 15 / 26

© 2011 BioDigit Ltd.
All rights reserved. It is forbidden to reproduce and/or publish the
contents of the present document in any form including electronic
and mechanical design without the written permission of BioDigit
Ltd.
Safety warning
During the operation of the device the specified technical
parameters shall always be met. At the installation the
environment shall be fully taken into consideration. The device
must not be exposed to moisture and direct sunshine.
A soldering tool may be necessary for the installation and/or
mounting of the devices, which requires special care.
During the installation it shall be ensured that the bottom of the
device should not contact with a conductive (e.g. metal) surface!
Contents
Safety warning ......................................................................1
Features and properties ..........................................................2
Technical parameters: ............................................................2
Short description ...................................................................3
Applicable supply units ...........................................................3
Grounding and power supply of the booster ...............................3
Supply voltage ......................................................................4
Connectors ...........................................................................4
Signals .................................................................................5
Thermal protection.................................................................6
Switching-in/-out of the output voltage .....................................6
Feedback of the operating status..............................................7
Start-up delay .......................................................................7
Recovery delay ......................................................................7
Short-circuit current ...............................................................7
Polarity change current limit ....................................................8
Programming of the parameters...............................................8
Guarantee and legal statement .............................................. 10