www.FX-Products.com
Page
4
of
7
Rev 010518
6.
Remove OEM electrical harness from bumper. Disconnect harness from fog lights and sensors. Pop out the three plastic
clips holding fog lights to fog light housing and carefully pull away, the plastic clips are indicated by a circle. Unbolt
bumper support frames as necessary to more easily access sensors, star with the bottom bolts indicated by squares
(Fig
6)
.
Bumper Installation
1.
Remove the fog light from the vehicle. Use the OEM screws and nut plates to fasten the fog light to the bumper
(Fig 7)
.
Fig 7
