www.FX-Products.com
Page
2
of
7
Rev 010518
INSTALLATION PROCEDURE
BUMPER IS HEAVY, ASSISTANCE IS HIGHLY RECOMMENDED TO AVOID POSSIBLE INJURY OR
DAMAGE TO THE VEHICLE.
Vehicle Preparation
Note: Keep all the OEM parts carefully until finishing the installation!
1.
Open the hood and locate push pins on radiator cover. Using a flathead screwdriver, pull the head of the push pin up,
remove push pin and lift radiator cover off. This will allow access to top grille bolts
(Fig 1)
.
2.
Remove the fasteners connecting the grille to the frame. Four bolts, are located at the top of the grille, two on each side
(Fig 2A & 2B)
. Two bolts and two clips are located behind the grille and are indicated by the ovals and triangles
respectively
(Fig 2C)
.
