Page
3
of
5
3.
Select the driver side Frame Bracket,
(Figure 5)
. Position the Frame Bracket onto the outside of the
frame channel and over the (2) Bolt Plates,
(Figure 6)
. Secure the Bracket to the frame and Bolt Plates
with (2) 12mm Flat Washers and (2) 12mm Nylon Lock Nuts. Leave hardware loose at this time.
4.
Next, select the driver side Bull Bar Mounting Bracket,
(Figure 7)
. Attach the Bull Bar Bracket to the
inside of the Frame Bracket with the included (2) 10mm x 30mm Hex Bolts, (4) 10mm Flat Washers and
(2) 10mm Nylon Lock Nuts,
(Figure 7)
. Leave hardware loose at this time.
NOTE
: On some models, it
may be possible or simpler to bolt the Frame and Mounting Brackets together first and install as one
piece.
(Fig 5) Attach driver/left Frame Bracket
to 12mm Bolt Plates in end of frame
(2) 12mm Flat Washers
(2) 12mm Nylon Lock
Nuts
(2) 12mm Bolt Plates
(2) 12mm Plastic
Retainers (use is
optional)
(Fig 5) Attach driver/left Frame Bracket
to 12mm Bolt Plates in end of frame
(2) 12mm Flat Washers
(2) 12mm Nylon Lock Nuts
(2) 12mm Bolt Plates
(2) 12mm Plastic
Retainers (use is
optional)
(2) 12mm Flat Washers
(2) 12mm Nylon Lock Nuts
Front
(Fig 6) Driver/left Frame Bracket pictured
