www.TrailFX.com
Page
4
of
8
Rev 091620
Driver Side Installation Pictured
IMPORTANT: On models without tow
hooks, use only the supplied
12-1.5mm x 30mm Fine Thread Hex Bolt
12mm Flat Washer
12mm Lock Washer
(Fig 4A) Driver side Support Bracket in "no
tow hook-with bumper support" position
Front
(1) 10mm x 35mm Hex Bolt
(2) 10mm Flat Washers
(1) 10mm Lock Washer
(1) 10mm Hex Nut
Driver/Left Upper Frame
Bracket "no tow hook models,"
reuse factory hex nuts
(2) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
Front
Fig 5
(Fig 3) Driver side Bracket layout
in "no tow hook" position
Driver/Left
Upper Frame
Bracket
Driver/left
Mounting Bracket
Support Bracket over
bumper support
(Fig 4B) Driver side Support Bracket
in "no tow hook-no bumper support"
position as also pictured in Figure 10
