TrailFX B1503S Скачать руководство пользователя страница 1

Страница: 1 / 8

www.TrailFX.com

Page

Rev 091620

THE BULL BAR MAY INTERFERE WITH PARKING SENSORS, P

ROXIMITY SENSORS AND CRUISE CONTROL SENSORS.

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.

READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

DO NOT OVER TORQUE. STANDARD OPERATING LOAD FOR

TIGHTENING BODY MOUNT NUTS & BOLTS VARIES FROM 7 TO 8.5

FOOT POUND FOR M6 ,18 TO 20 FOOT POUND FOR M8, 35-40 FOOT

POUND FOR M10 AND 60 TO 70 FFOOT FOOT POUND FOR M12.

60-180 min

[email protected]

1 866 638 4870

POLISHED STAINLESS STEEL

– LIMITED LIFETIME

POWDER COATED BLACK

– 3 YEARS

Cutting

Required

PARTS LIST:

Qty

Part Description

Qty

Part Description

1 Bull Bar

2 10-1.5mm x 35mm Hex Bolts

2 Tube Brackets (Bull Bar) passenger or driver side

2 10mm Lock Washers

1 Driver/Left Upper Frame Brackets (models w/o tow hooks only)

4 10mm x 27mm OD x 3mm Flat Washers

1 Passenger/Right Upper Frame Brackets (models w/o tow hooks only)

2 10-1.5mm Hex Nuts

1 Driver/Left Mounting Bracket

4 8-1.25mm x 35mm Hex Bolts

1 Passenger/Right Mounting Bracket

4 8mm Lock Washers

1 Driver/Left Support Bracket

4 8mm x 22mm OD x 2mm Flat Washers

1 Passenger/Right Support Bracket

4 6-1.0mm x 20mm Button Head Bolts

2 Light Brackets

4 6mm Lock washers

12-1.5mm x 30mm

Special Fine Thread

Hex Bolt (for models w/o

tow hooks only)

4 6mm x 18mm OD x 1.6mm Flat Washers

4 12-1.75mm x 35mm Hex Bolts

2 5-.8mm x 20mm Button Head Allen Bolt

14 12mm x 32mm OD x 3mm Flat Washers

4 5mm x 10mm OD x 1mm Flat Washers

10 12mm Lock Washers

2 5mm Nylon Lock Nuts

8 12-1.75mm Hex Nuts

1 Wrench (Allen bolt)

PROCEDURE:

3.5

” Oval Bull Bar

Part No.

B1503S/B

Fits: 2009-2018 RAM 1500 (Excl. Rebel & Warlock Trims / Incl. 2019-

Current Ram 1500 Classic)

Passenger/Right
Mounting Bracket

Driver/Left

Mounting Bracket

Passenger Side

Support Bracket

(see note below)

Driver Side Support Bracket
pictured in "no-tow hook"
direction. Reverse direction for
tow hook equipped vehicles

Driver/Left
Upper Frame
Bracket (no
tow hook only)

Passenger/Right
Upper Frame
Bracket (no tow
hook only)

Tube Brackets

Drilling Not

Required

Содержание B1503S









Результаты поиска

Содержание B1503S

Отзывы:

Похожие инструкции для B1503S

Бренды по названию

Популярные бренды

TrailFX B1503S, Быстрый старт

Результаты поиска

Содержание B1503S

Отзывы:

Похожие инструкции для B1503S

Бренды по названию

Популярные бренды