Envir
o
nment Mode
The Environment Mode settings allows you to select the power
supply
frequency used at the
location of
the
WAPP camera. The power
supply
frequency varies depending on geographic
region.
I
mage flicker
may occur
if
the
wrong frequency is selected
(50Hz for the UK)
.
Low Light Enhancement
The Low Light Enhancement Mode is for improving the night view video image by providing 5
levels to select from (5 = brightest).
WI-FI SETTING
The Wi-Fi setting allows you to choose the wireless connection and setup the Wi-Fi environment.
When you tap the “Manage Wi-Fi network” button, the system automatically scans the nearby
network and shows the available Wi-Fi routers in the drop-down list. Choose the appropriate Wi-Fi
router and enter the Wi-Fi router password if necessary. Due to security concerns, it is suggested
to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network.
Note:
1.
When the Wi-Fi connection is completed and the Ethernet cable is disconnected, the
camera will reboot and it will take several minutes to re-establish the connection. Please
re-launch the APP when the WAPP camera green LED signal indicator illuminates.
The WAPP camera is designed to work within the legal Wi-Fi channels in your region.
Please refer to your Wi-Fi router manual to choose an appropriate channel for the WAPP
camera.
If the camera fails to connect to the Wi-Fi router, please hold down reset button for 2
seconds to reset the system and repeat the registration process again.
2.
3.
2
5
