Wiring Loom Fitting Instructions
To Suit Hyundai Tucson TL
Part Number 201365-WL
Page
3 of 3
Issue Date
10-09-15
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9797 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
20. Remove the indicated vehicle 30A fuse (1). Insert the vehicle fuse 30A fuse (1) and the
supplied 20A fuse (2) to the add-a-fuse harness (3). Connect the trailer patch 1-way
connector (4) to the add-a-fuse harness (3). Insert the add-a-fuse harness (5) to the
previously removed fuse location (6). Ensure the add-a-fuse harness is orientated
as shown.
21. For RPA over ride function, locate the 13-way connector (1) at the LHS lower rear
exterior of the vehicle.
22. Locate the ORANGE wire (2) on the connector and cut the ORANGE wire.
23. Patch RPA Over ride (P/No: 04848) in between the cut ORANGE wire.
24. Seal and waterproof the connection appropriately after patching.
25. Refit the tail lights.
26. Test the Trailer Harness function using a light board or multi-meter.
27. Secure all harnesses using cable ties (not supplied).
28. Re-fit removed parts and secure all fasteners, ensuring there are no squeaks or
rattles.
29. Place the instructions in the glove box after fitment.