Towbar Fitting Instructions
To Suit
HYUNDAI TUCSON TL & TLe SERIES
Part Number
QTHY264L
Rating
1600/140
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Rev: A Page 4
Issue Date:
21-04-2016
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
16. Tighten all screws to torque listed on page 1 of this document.
17. Where required, secure smart key antenna brackets to holes in top of towbar using Tek screws.
18. Secure bumper tab brackets in holes on rear face of towbar using Tek screws.
19. Identify centre of bumper and create bumper cut as per diagram below.
20. Mark out and drill 2x ø5mm holes 69mm apart on bumper skin to support plug bracket. Feed bracket threads through
drilled holes prior to reinstalling bumper.
21. Refit rear bumper by following steps 1 to 4 and 6 to 8 in reverse order.
22. Where applicable, secure smart key antenna to smart key antenna brackets.
23. Secure loose wiring to towbar using cable ties.
DRWING NOT TO SCALE