Towbar Fitting Instructions
To Suit
HONDA CR-V RW CL4
Part Number
QTHN454L
Rating
1500/100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
Rev: A Page 7 Issue Date:
04/04/2018
13. On LH side arm, loosely secure with 3 x M8
bolts complete with 1 x M8 washer per bolt to
the rear panel.
Additionally, loosely secure LH side arm to
underside of chassis rail via 2 x M10 x 35mm
bolts complete with 1 x M10 washer plate per
bolt.
Repeat for RHS.
14. Lift towbar up to side arms and loosely secure
the LHS with 2 x M10 x 35mm bolts complete
with 2 x M10 washers and 1 x M10 nut per
bolt.
Repeat for RHS.
15. Secure towbar to centre recovery hook via 1 x
M12 bolt complete with 2 x M12 washers and
1 x M12 nut. Insert spacer plates provided
onto bolt between tow hook and dropper until
a tight fitting is achieved.
NOTE:
Not all spacer plates may be used.
Tighten all fasteners to the torques listed
below:
M8 x 1.25 x G8.8:
22 N.m
M10 x 1.5 x G8.8:
44 N.m
M12 x 1.25 x G8.8:
89 N.m
