1.
Uplift the frame to align the shock (A)
mounting hole to the swing arm joint
hole.
2. Fix the bolt (B) through the shock
mounting hole and swing arm joint and
tighten the nut (C) securely with 10mm
and 13mm open end wrench
A
：
shock absorber
B
：
bolt M8X40
C
：
nut M8
INFLATING THE TYRES
NOTE
: The ty
res are inflated when shipped, but they invariably lose some pressure
between
the point of manufacturing and you
r purchase. Always inflate the tyres to the
cor
rect PSI before first time use.
Please read the specification sheet to get the information of tyre pressure.
Using a bicycle-style tyre pump to
inflate the tyre to the PSI indicated on the sidewall of
the tyre.
NOTE
: The pressurized air supplies found at gasoline
stations are designed to inflate
high-volume automobile tyres. If you decide to use such an air supply to
inflate your
tyres,
first make sure the pressure gauge is working, then use very short bursts to
inflate to the correct PSI. If you inadvertently over-inflate the tyre, release the excess
pressure immediately.
Important information of use guider for tyre
Note: Tyre is the only contact between the vehicle to the road, the safety of various
driving activity depends on the small area of tyre where it contacts with the road.
Therefore, it is very important to keep the tyre in good condition at all times and use the
correct size and standard tyre to replace the old ones.
Guide:
Tyre assembly and disassembly:
It is strongly recommended that the tyre assembly and disassembly should be done by
an authorized technician with necessary skills.
Tyre inflating pressure:
It is very important to keep the tyre in proper pressure and check the tyre pressure
