OmniCounter
OmniCounter
Wireless
Wireless
Infrared People Counter
Infrared People Counter
Model: OmniCounter
Model: OmniCounter
Traf-Sys/Walker Wireless, Inc | 190 Industry Drive – Pittsburgh, PA 15275
Page 2 of 9
Ph: 888-815-6568 | Fax: 928-222-7279 |
www.trafsys.com
Mounting and Orientation
One key to your OmniCounter People Counters operating properly and efficiently is their
mounting orientation and height; normal mounting height is between 36 and 52 inches.
Please see the illustrations below:
Figure 1
Figure 1 shows a typical side-
firing (door mounted)
installation.
Figure 2 shows a typical front-
firing (wall mounted)
installation.
Figure 2
Proper Orientation/Alignment is required for the counters to function properly.
Located on both the transmitter and receiver (LCD Display side) is a dimple that is
used to allow the correct orientation. The dimples are also used to indicate which
side of the enclosure the IR receiver or IR transmitter is located when using the
counter in Side-Firing Mode. The dimples have been painted white so they can be
located easily.
Side Firing Mode
In Side-Firing Mode, the counters need
to be mounted so that the dimples are
oriented to the center.
